Featured
-
Factory Cheap Hot Furnace Melting Gold – Induction Melting Furnace for Gold Platinum Silver Copper Rhodium Palladium – Hasung
Technical Parameters With the MU series We offer melting equipment for many different demands and with crucible capacities from 1kg up to 8kg(Au). The metal materials are molten in open crucibles and poured by hand with a tong into the necessary mould. Melting Units MU Series Flexible melting machines are designed to melt gold and silver alloys and as well as aluminium, bronze, brass, etc. Due to the strong induction generator up to 15 kW and the low induction frequency the stirring effect of... -
Short Lead Time for Jewelry Casting Machinery – Continuous Casting Machine for Gold Silver Copper Alloy – Hasung
Technical Parameters Model No. HS-CC1 HS-CC2 HS-CC3 HS-CC4 HS-CC8 HS-CC20 HS-CC30 HS-CC50 HS-CC100 Voltage 220V Single phases 380V 50/60Hz,3 phase Power 5KW 8KW 15KW 30KW 30KW/60KW 60KW Max. Temp. 1500°C Melting speed 2-3 mins. 3-5mins. 3-5mins. 10-15mins. 20-25mins 15-25mins Capacity (Gold) 1kg 2kg 4kg 4kg 8kg 20kg 50kg 100kg 100kg Suitable for K-Gold,Gold, silver, copper Maximum flasks diameter can be customized Operation method One-key operation to complete the en... -
Hot-selling Granulating Machine For Sale - Vacuum Shot Maker for Gold Silver Copper 1kg 2kg 4kg 8kg – Hasung
The vacuum granulator uses inert gas to protect the smelting metal. After the smelting is completed, the molten metal is poured into the water tank under the pressure of the upper and lower chambers. In this way, the metal particles we obtain are more uniform and have better roundness. Secondly, because the vacuum pressurized granulator is protected by inert gas, the metal is casted in the condition of completely isolating the air, so the surface of the casted particles is smooth, free of oxi... -
Europe style for Jewelry Machines - TVC Series Vacuum Pressure Casting Machine for Gold Silver Copper – Hasung
Features Casting methods The usual casting methods are: flame casting induction casting vacuum pressure die-casting Flame casting Flame casting is the most traditional casting method and it is probably the most common and less expensive one. This method has been useful to develop casting techniques but it does not fit well with the legal and technical requirements of present-day market. This technique is based solely on the operator’s competence and skill: use of this technique requires ... -
Factory Price Gold Pendant Casting - Continuous Casting Machine for Gold Silver Copper Alloy – Hasung
Technical Parameters Model No. HS-CC1 HS-CC2 HS-CC3 HS-CC4 HS-CC8 HS-CC20 HS-CC30 HS-CC50 HS-CC100 Voltage 220V Single phases 380V 50/60Hz,3 phase Power 5KW 8KW 15KW 30KW 30KW/60KW 60KW Max. Temp. 1500°C Melting speed 2-3 mins. 3-5mins. 3-5mins. 10-15mins. 20-25mins 15-25mins Capacity (Gold) 1kg 2kg 4kg 4kg 8kg 20kg 50kg 100kg 100kg Suitable for K-Gold,Gold, silver, copper Maximum flasks diameter can be customized Operation method One-key operation to complete th... -
2022 New Style 8kg Gold Melting Furnace - Tilting Induction Melting Furnace For Gold Platinum Palladium Rhodium 1kg 5kg 8kg 10kg 12kg – Hasung
Features Hasung Dual Use gold and platinum melting furnace can efficiently and effortlessly melt platinum, silver, gold, palladium and certain alloys. The compact size of the platinum melting furnace makes it convenient to move about. Hasung multipurpose gold and platinum melting furnace is also suitable for small scale melting because it melts about 1g to 2kg of metals at once, therefore, small businesses that require melting need not worry about getting a melting furnace that only meet... -
Factory Supply Silver Casting Equipment - Vacuum Continuous Casting Machine for Gold Silver Copper Alloy – Hasung
Technical Parameters Power Supply 380V 50/60Hz,3 phase Power Input 8KW 15KW Max Temp 1500°C Melting speed 3minutes 3- 5min Capacity 2kg(18K gold) 5kg(18K gold) Suitable for K-Gold,Gold, silver, copper Maximum flasks diameter can be customized Operation method One-key operation to complete the entire process, POKA YOKE foolproof system control system Mitsubishi PLC+Human-machine interface intelligent control system (optional) Blanketing with inert gas Nitrogen/argon ... -
Excellent quality Rate Of Silver Ornaments - Tunnel Type Gold Ingot Vacuum Casting System – Hasung
A Logical Solution In the past years, the market of investment precious metals has become more and more demanding: nowadays an ingot must have the same aesthetic properties of a jewel. Using the machines available on the market prior to the launch of HS-VF260, one could manufacture products of reasonable quality, but it was difficult for operators to manage them. As a matter of fact, calibration of work parameters and ordinary maintenance were almost exclusively limited to highly-special... -
Hot New Products Jewelry Vacuum Pressure Casting Machine - Metal Powder Water Atomizer For Precious Metal Powder Gold Silver Copper – Hasung
Features HS-MI1 is a family of water atomizers designed to produce metal powders of irregular shape, to be used in industrial, chemical, soldering paste, resin filters, MIM and sintering applications. The atomizer is based on an induction furnace, working in a closed chamber under protective atmosphere, where the molten metal is poured and hit by a jet of high pressure water, producing fine and deoxidized powders. Induction heating ensures a very good homogenization of the melt thanks to... -
Factory supplied Gold Jewellery Machine - Continuous Casting Machine for Gold Silver Copper Alloy – Hasung
Technical Parameters Model No. HS-CC1 HS-CC2 HS-CC3 HS-CC4 HS-CC8 HS-CC20 HS-CC30 HS-CC50 HS-CC100 Voltage 220V Single phases 380V 50/60Hz,3 phase Power 5KW 8KW 15KW 30KW 30KW/60KW 60KW Max. Temp. 1500°C Melting speed 2-3 mins. 3-5mins. 3-5mins. 10-15mins. 20-25mins 15-25mins Capacity (Gold) 1kg 2kg 4kg 4kg 8kg 20kg 50kg 100kg 100kg Suitable for K-Gold,Gold, silver, copper Maximum flasks diameter can be customized Operation method One-key operation to complete th... -
Top Quality Jewelry Making Equipment - Tunnel Type Gold Ingot Vacuum Casting System – Hasung
A Logical Solution In the past years, the market of investment precious metals has become more and more demanding: nowadays an ingot must have the same aesthetic properties of a jewel. Using the machines available on the market prior to the launch of HS-VF260, one could manufacture products of reasonable quality, but it was difficult for operators to manage them. As a matter of fact, calibration of work parameters and ordinary maintenance were almost exclusively limited to highly-special... -
Hot New Products Gold Rolling Machine - High Vacuum Continuous Casting Machine For New Materials Casting Bonding Gold Silver Copper Wire – Hasung
Technical Parameters Model No. HS-HVCC5 HS-HVCC20 HS-HVCC50 HS-HVCC100 Voltage 380V 3 Phases, 50/60Hz Power Supply 15KW 30KW 60KW Max Temp 1500°C Casting Speed 200mm-400mm/min. (Can be set) Casting Diameter 4mm-16mm Temp Accuracy ±1°C Capacity (Gold) 5kg 20kg 50kg 100kg Vacuum Pump High quality vacuum pump/German vacuum pump, vacuum degree – 10×10-4 Pa (optional) Application Gold, silver, copper and other alloys Operation method One-key operation to c...
